RWE and GE Developing Efficent Compressed Air Energy Storage  

LiveScience has a report on efforts to develop more efficient compressed air energy storage - a vital cog in a clean energy economy - How Compressed Air Could Power the Future. One of the keys to this storing the heat generated when compressing the air - I wonder if graphite is worth exploring ?

Wind power is unreliable. No one can turn up the wind every time electricity demand peaks. So some utilities are looking at ways to bottle up the wind's energy and store it underground for later use. ...

Compressed air energy storage (CAES) uses off-peak electricity from wind farms or other sources to pump air underground. The high pressure air acts like a huge battery that can be released on demand to turn a gas turbine and make electricity. However, a good portion of the input energy is lost in this process, making CAES one of the least efficient storage technologies available. ...

So, RWE and General Electric (GE) recently announced plans to develop a new type of CAES technology that will be more efficient, as well as having zero greenhouse gas emissions.

Storing off-peak electricity is not new. By far the most common method is to pump water up to an elevated reservoir and then release it to drive an electric generator when demand calls for it. Once "charged," these pumped hydro systems — of which around 300 exist worldwide — can supply 1,000 megawatts of power for several hours. However, there are few places left with available water and the right topography, Marquardt said.

CAES can supply around 100 megawatts of power for several hours, and the needed geological formations (abandoned mines, salt caverns, aquifers) can be found around the world. ...

Currently only two operating CAES facilities exist in Germany and Alabama. They each use salt caverns with several hundreds of thousands of cubic meters of space (roughly the volume of 100 Olympic-sized swimming pools).

Using off-peak electricity, air is compressed to around 1,000 psi (or 70 times atmospheric pressure), which raises its temperature to more than 600 degrees Celsius (1,100 degrees Fahrenheit). This is far too hot to pump underground, so the air is cooled to about 50 degrees Celsius (120 degrees Fahrenheit).

Unfortunately, the air must be reheated on release in order to turn a turbine. This extra reheating energy (usually provided by burning natural gas) means CAES has a relatively low efficiency of about 50 percent: for every kilowatt-hour of energy going in, only 0.5 kilowatt-hour of energy can be taken out. ...

To improve the efficiency, RWE and GE are working on a new design called advanced adiabatic CAES (AA-CAES), in which the heat that is removed from the air during compression is stored and later used to reheat the gas as it is discharged. "In this case, the air is hot enough to drive an air turbine without using combustion gases," Marquardt said.

The efficiency could be increased to 70 percent, and if combined with wind power, an AA-CAES system would release no carbon dioxide, a major driver of global warming.

RWE and GE are currently doing a feasibility study looking in particular at what material would be best for storing the immense heat. Marquardt thinks the likely choice will be ceramic bricks, but a possible alternative solution is a bed of rock pebbles.

Once the technical difficulties are all ironed out, Marquardt expects a first demonstrator project — supplying around 30 megawatts of power — sometime around 2012. The future goal is to have an AA-CAES facility that can supply 10 times that.

In the United States, traditional CAES is being considered by several companies, but only one new project, the Iowa Storage Energy Park (ISEP), is in the design stage. Funded by a group of municipal utilities, ISEP would store enough wind and off-peak energy to supply 270 megawatts of power for 16 hours each day.