A More Efficient GTL Process  

Tyler Hamilton has an article in Technology Review looking at a new, efficient gas to liquids (GTL) process - Natural Gas to Gasoline. What does this mean from a peak oil point of view ? Most likely that we have a higher "total liquids" peak but that it occurs sooner than it otherwise would.

A Texas company says that it has developed a cheaper and cleaner way to convert natural gas into gasoline and other liquid fuels, making it economical to tap natural-gas reserves that in the past have been too small or remote to develop.

The company behind the technology, Dallas-based Synfuels International, says that the process uses fewer steps and is far more efficient than more established techniques based on the Fischer-Tropsch process. This process converts natural gas into syngas, a mixture of hydrogen and carbon monoxide; a catalyst then causes the carbon and hydrogen to reconnect in new compounds, such as alcohols and fuels. Nazi Germany used the Fischer-Tropsch process to convert coal and coal-bed methane into diesel during World War II.

A Synfuels gas-to-liquids (GTL) refinery goes through several steps to convert natural gas into gasoline but claims to do so with better overall efficiency. First, natural gas is broken down, or "cracked," under high temperatures into acetylene, a simpler hydrocarbon. A separate liquid-phase step involving a proprietary catalyst then converts 98 percent of the acetylene into ethylene, a more complex hydrocarbon. This ethylene can then easily be converted into a number of fuel products, including high-octane gasoline, diesel, and jet fuel. And the end product is free of sulfur.

"We're able to produce a barrel of gasoline for much cheaper than Fischer-Tropsch can," says Kenneth Hall, coinventor of the process and former head of Texas A&M University's department of chemical engineering. Hall says that a Fischer-Tropsch plant is lucky to produce a barrel of gasoline for $35 but that a much smaller Synfuels refinery could produce the same barrel for $25. Under current fuel prices, such a plant could pay for itself in as little as four years, the company says.